top of page

Group

Public·10 members

How to Install Drivers for Mackie Onyx Satellite on Windows 10 64-bit



How to Install Drivers for Mackie Onyx Satellite on Windows 10 64-bit




Mackie Onyx Satellite is a portable FireWire recording interface that allows you to capture high-quality audio on the go. It features two Onyx mic preamps, phantom power, zero-latency monitoring, and a docking station that provides additional inputs and outputs. However, to use it with Windows 10 64-bit, you need to install the correct drivers for your system.




DriversMackieOnyxSatelliteforWindows1064bit


DOWNLOAD: https://www.google.com/url?q=https%3A%2F%2Furluso.com%2F2tKjWb&sa=D&sntz=1&usg=AOvVaw35KbuoYe3ydWkavq21kQhr



In this article, we will show you how to download and install the drivers for Mackie Onyx Satellite on Windows 10 64-bit. We will also provide some troubleshooting tips in case you encounter any issues.


Step 1: Download the Drivers




The first step is to download the drivers for Mackie Onyx Satellite from the official website of MACKIE[^1^]. You can find them under the Drivers/Downloads section. Alternatively, you can use this link[^2^] to access the ONYX DRIVER COMPATIBILITY page, where you can find the driver version that matches your operating system and device serial number.


According to the ONYX DRIVER COMPATIBILITY page[^2^], if you have an Onyx Satellite with a serial number beginning with 003, you need to download the PC v1.7 driver. If you have an Onyx Satellite with a serial number beginning with 204, you need to download the PC v4.1 driver. You can check your device serial number on the bottom of the unit.


Once you have downloaded the driver file, save it to a convenient location on your computer.


Step 2: Install the Drivers




The next step is to install the drivers for Mackie Onyx Satellite on your computer. To do this, follow these steps:


  • Make sure your Onyx Satellite is disconnected from your computer.



  • Double-click on the driver file that you downloaded in step 1.



  • Follow the on-screen instructions to complete the installation process.



  • Restart your computer when prompted.



  • Connect your Onyx Satellite to your computer using a FireWire cable.



  • Wait for Windows to detect and configure your device.



Congratulations! You have successfully installed the drivers for Mackie Onyx Satellite on Windows 10 64-bit. You can now use it with your favorite audio software.


Troubleshooting Tips




If you encounter any problems while using your Onyx Satellite on Windows 10 64-bit, here are some tips that might help:


  • Make sure you have installed the latest updates for Windows 10 64-bit.



  • Make sure you have connected your Onyx Satellite to a powered FireWire port or hub.



  • Make sure you have selected your Onyx Satellite as the default audio input and output device in Windows Sound Settings.



  • Make sure you have configured your audio software to use your Onyx Satellite as the audio interface.



  • If you experience any glitches, pops, or clicks in your audio, try adjusting the buffer size or sample rate settings in your audio software or driver control panel.



  • If you need more help, you can contact MACKIE support[^1^] or visit their online forum[^3^].



e0e6b7cb5c


About

Welcome to the group! You can connect with other members, ge...
bottom of page